Pair Rings

1.		2.		3.		4.
1.Roll out the 7g of clay into rope shape		2.Wrap around the wooden mandrel		3.Fix the shape as a half-round shape		4. Dry the piece completely with a hot air dryer

5.		6.		7.		8.
5. Fix the shape with medium fine file		6. Polish the surface with sandpaper (or sponge sanding pad)		7 Draw design on the piece with pencil		8. Carve the design with a craft knife, and fire the piece

9.		10.		11.		12.
9. After firing, apply the stainless steel brush on the piece		10. Create the mirror finish with burnisher		11. Sulphurize the piece		12. Finish the piece with polishing cloth and metal polish

Pendant Charm

1. 2. 3. 4. Roll out the 7g of clay into about 1mm thick round shape Make a hole by using a straw at about 2~3mm from the top of the piece Mold the piece into 3 dimensional shape Dry the piece completely with a hot air dryer

5. 6. 7. 8. Fix the shape with medium fine file Draw design on the piece with pencil Carve the design with Burnisher and fire the piece After firing, apply the Stainless steel brush on the piece

9. 10.       Polish the piece with Sandpaper (or Sponge sanding pad) Finish the piece with polishing cloth and metal polish to create the mirror finish